By Jan Bay
This fabric Christmas stocking garland is a fun way to use pretty scraps of Christmas cotton fabric and make a decoration you can enjoy year after year. It's one of my favorite stash busters! This season I've combined seven miniature stockings in red gingham, ivory ticking stripes, and red polka dots, each finished with a little ivory felt cuff and a fabric hanging loop. You can sew this garland for a Christmas baby shower, Baby's First Christmas celebration, or a family holiday party in any combination you like. I've included a free printable stocking pattern, measurements, and step-by-step sewing instructions to help you make your own
Explore More Christmas Crafts and Garland Ideas
DIY Christmas Garland Ideas and Tutorials
DIY Felt Christmas Stocking Mini Ornaments
Baby Christmas Crafts and Keepsake Ideas
See Supplies for This Project Here.
Jump to a Section
We're making seven little fabric stockings for this garland, and you won't need much fabric to do it. I like the combination of red gingham, ivory ticking stripes, and red polka dots because the patterns look good together without making the garland too busy.
The stockings are sewn from cotton fabric, turned right side out, and finished with ivory felt cuffs. That gives them a different look from little felt stocking ornaments. There's no stuffing, so they hang flat and don't add unnecessary weight to the cord.
The finished measurements are based on the cutting template and planned seam allowances. They're approximate rather than measurements taken from a physically sewn sample.
I'd make all seven stockings before attaching any to the garland. That way, you can lay them out together and make sure the colors and patterns are arranged the way you want.
You'll need:
Three coordinating fat quarters should give you enough cotton fabric for the seven stockings, with some left over. If you already have suitable Christmas fabric scraps, use those instead.
Choose lightweight or medium-weight woven cotton. I'd skip bulky upholstery fabric, stretchy knits, and anything with a thick backing. Those materials make the little heel and toe harder to sew neatly.
If you're using striped fabric, check the direction of the stripes before cutting. The red lines should run from the cuff toward the toe, as they do in the finished example.
You can prewash and press the cotton if you plan to clean the finished stockings later. Keep the felt separate until you're ready to cut the cuffs, and follow its care instructions.
I've included a printable pattern with the stocking body, ivory cuff, hanging-loop measurements, and the arrangement for all seven stockings.
Download the Free Mini Christmas Stocking Garland Pattern and Templates (PDF)
The pattern prints on ordinary US Letter paper. Choose 100% or Actual Size in your printer settings. Don't select Fit to Page, Shrink to Fit, or another option that changes the size.
Before you cut any fabric, measure the 1-inch test square on the printed template. It should be exactly 1 inch wide and 1 inch tall.
Here's what the pattern includes:
Cut the stocking template along its outside edge. Don't add another seam allowance. If you do, the stockings will be larger than the ones shown in the example.
One more thing before we start: the stockings have two matching fabric pieces, but they aren't lined. The wrong sides of the cotton will be inside the finished stocking, and the top will remain open.
Start with the red gingham. We're making three gingham stockings, two striped stockings, and two polka-dot stockings.
Put the two fabric layers together with their right sides facing each other. That way, you'll cut matching front and back pieces at the same time.
Try to keep the stripes straight as you cut. If the fabric shifts, the lines may lean to one side on the finished stocking. A few pins will help hold the layers together.
Cutting checkpoint: You should have 14 individual stocking pieces arranged in seven matching pairs:
Next, use Template B to cut 14 ivory felt cuff rectangles. Each stocking needs one for the front and another for the back.
Cut seven pieces of red cotton tape or ribbon, each 3 inches long. These will make the hanging loops.
You should now have all the fabric and felt pieces needed to make the seven stockings.
Let's sew one stocking first and make sure you're happy with the shape before working on the other six.
Take a matching pair of fabric pieces and put them together with the right sides facing inward. Line up the top edges, sides, heel, and rounded toe.
If you're using a sewing machine, a straight stitch around 2 to 2.5 mm long should work well for ordinary quilting cotton. Shorten your stitches slightly as needed around tight curves.
If you're sewing by hand, use small backstitches along the same seam line. Keep the seam allowance consistent all the way around.
Seam checkpoint: The two stocking pieces should now be joined around the sides, heel, and toe, with the entire straight top edge left open.
Before turning the stocking right side out, you'll need to reduce some of the bulk around its curves.
Don't cut away too much fabric. You only need enough room for the curved seam to open neatly when the stocking is turned.
If you'd like a closer look at the difference between clipping and notching, Utah State University Extension's basic sewing guide explains both techniques.
Take a look at the heel and toe. They should have smooth curves without large bumps or deep wrinkles.
If a curve looks pinched, turn that part of the stocking back toward the wrong side and check the seam allowance. You may need one or two additional small clips. Keep them clear of the stitching.
Repeat these sewing and turning steps for the remaining six stockings.
Sewing checkpoint: You should now have seven fabric stockings, all right side out, with smooth heel and toe shapes and open upper edges.
We don't want raw cotton edges showing above the ivory cuffs, so let's finish the openings before adding the hanging loops.
Repeat for all seven stockings.
The upper edges don't need fancy finishing because the felt cuffs will cover them. They just need to be neat and stay folded.
Upper-edge checkpoint: Each stocking should have two finished top edges and an opening between them. The sides should still meet neatly at both upper corners.
Every little stocking needs a hanging loop. I prefer sewing the loop directly to the cotton fabric rather than attaching it to the felt cuff. That gives the loop a firm place to hold, and the cuff will cover the lower ends of the ribbon.
You'll use the seven 3-inch pieces of red cotton tape or ribbon you cut earlier.
The visible loop should measure approximately 1 inch tall above the stocking opening.
Give the loop a gentle pull. If the stitching moves or the fabric puckers, reinforce it before going any farther.
Repeat until all seven stockings have hanging loops.
Hanging-loop checkpoint: You should have seven stockings with firmly attached red loops. The loops should come up from the back, and every stocking opening should remain free.
Now we'll add those little ivory cuffs. They're what make the stockings look finished, and I wouldn't leave them off.
Each stocking gets two felt rectangles, one across the front and one across the back. The finished cuffs will look like one continuous band around the top.
Don't pull the embroidery floss too tightly. The felt should lie flat against the cotton without gathering it.
The red stitches are meant to show, so there's no need to hide them. They add a nice handmade detail to the ivory felt.
Look at the sides of the stocking. The front and back felt cuffs should extend just far enough beyond the cotton to meet.
You should now have one continuous-looking ivory cuff around the top of the stocking.
Repeat the entire cuff process for the remaining six stockings.
There are no buttons, beads, or separate decorations to attach. The cotton prints, red stitches, and ivory felt are enough.
Finished stocking checkpoint: You should have seven miniature stockings, each with a smooth cotton body, an ivory felt cuff, two decorative rows of red stitching, and a red hanging loop at the back.
Lay all seven flat and compare them. The cuffs should sit at about the same height, and the hanging loops should be similar in length.
Here's where I'd spend another minute before putting the garland together. A little attention to the order makes the mixed fabric prints look much more balanced.
Lay the stockings on your worktable in this order, from left to right:
There should be a gingham stocking at each end and another one in the middle.
The two striped stockings are separated by the center gingham, while the two polka-dot stockings help balance the red throughout the garland.
You can turn individual stockings around to change the direction of their toes. Since both sides have finished cuffs, the garland will still look neat. Keep the hanging loops at the top and the cuffs facing outward.
Before moving on, make sure you've included all seven stockings. It's much easier to correct the fabric order now than after you've secured them to the cord.
Arrangement checkpoint: Gingham, Stripe, Polka Dot, Gingham, Stripe, Polka Dot, Gingham. Seven stockings total.
We're using one length of twisted red-and-ivory cotton cord for the garland. I like this better than a plain string for this project because it carries the Christmas colors through the spaces between the stockings.
Cut the cord to exactly 56 inches before making the hanging loops at the ends.
Before finishing the ends of the cord, thread it through the seven red hanging loops.
Don't secure the stockings in place yet. We need to finish the cord ends first.
You should now have approximately 48 inches of usable cord between the two hanging-loop bases.
That's the length we'll use for spacing the stockings. The small loops at the ends are for hanging the completed decoration and aren't included in the 48-inch measurement.
Cord checkpoint: One 56-inch cord, two secured hanging loops, and seven stockings threaded onto the 48-inch center span.
Let's get the stockings evenly spaced before we hang the garland. You won't need to guess at the distances.
Lay the cord flat without stretching it. Starting at the base of the left hanging loop, measure and mark the following positions:
This gives you 6 inches between neighboring stocking attachment points, with another 6 inches of undecorated cord at each end.
When all seven are attached, lift the cord gently by its end loops.
Make sure the stockings don't slide toward the middle. If one moves, add a few more securing stitches around its hanging loop and the cord.
There's no need to pull the cord tight while checking the spacing. The measurements are taken along the cord itself, not across the distance between the wall hooks.
Spacing checkpoint: Seven evenly spaced stockings, secured at 6-inch intervals along the 48-inch center span. The middle gingham stocking is attached at the 24-inch mark.
Now you can see how the finished garland looks. I would hang it with a gentle dip in the middle rather than pulling the cord straight across. That little curve makes the stockings look more like a Christmas decoration than a row of laundry hung out to dry!
You should now have a complete fabric Christmas stocking garland with seven miniature stockings arranged in a balanced mix of Christmas prints.
If you want the two red bows shown in the example, cut two 36-inch lengths of wired velvet ribbon. Tie each piece into a bow with two full loops and two hanging tails. Trim the tail ends into a V shape. Attach one bow at each hanging hook, keeping the bows separate from the stocking cord so they don't change your spacing. Or skip them. The little stockings look pretty on their own.
If one stocking hangs at an angle, check where its ribbon loop is secured to the cord. A small adjustment at the attachment point is usually all that's needed.
I'd leave the stockings unstuffed. The flat construction is part of the design, and adding filling would change their shape and make them heavier.
Finished project checkpoint: Seven fabric stockings, seven ivory cuffs, seven red hanging loops, and one decorated cord with secure end loops. All three fabric patterns should be easy to see.
Once you've made the seven little stockings, you'll find several places to use your garland. I'd keep the display fairly simple so those pretty Christmas fabrics get the attention.
Hang the garland above a Christmas baby shower dessert table, gift display, or party backdrop. Red gingham looks especially pretty with ivory table linens and a few matching ribbons.
You don't have to use decorations with baby designs on every piece. The little stockings already give the display a Christmas look, and they work just as well for a baby shower as they do for a family Christmas party.
This would also be a lovely decoration to bring out for Baby's First Christmas. You could embroider a baby's initial on one of the ivory cuffs before attaching it to the stocking.
If you decide to personalize a cuff, do the embroidery while the felt piece is still flat. It's much easier than trying to stitch neatly through the completed stocking.
I'd use red embroidery floss to match the decorative running stitches. Keep the initial small enough to fit between the two horizontal rows of stitching.
For everyday Christmas decorating, try hanging the stocking garland against a mantel wall, across a decorative shelf, or above a buffet table.
You can pair it with wrapped gifts and other Christmas decorations, but you don't need to fill every inch around it. The mixed cotton prints already give you plenty of color and pattern.
If you don't need a full garland, you can use the same printable sewing pattern to make individual Christmas stocking ornaments.
Follow the cutting, sewing, cuff, and hanging-loop instructions exactly as written. Instead of threading the stocking onto the long garland cord, use its fabric loop to hang it individually from a suitable ornament hook.
That means you can use the same pattern for one little stocking or all seven. No need to print a different template.
Need a longer garland? Sew additional stockings using the same pattern.
Keep 6 inches between the stocking attachment points, and allow another 6 inches of undecorated cord at each end of the usable span. You'll also need enough extra cord to form the two end hanging loops.
For example, a nine-stocking garland would need eight 6-inch spaces between the stockings, plus 6 inches at either end. That's 60 inches of usable cord. Add 8 inches for the two end loops, giving you a total cutting length of 68 inches.
You can continue the gingham, stripe, and polka-dot arrangement or choose your own fabric order.
Before putting the garland away after Christmas, check that the stockings are clean and completely dry.
I'd store the garland loosely rather than folding the felt cuffs into sharp creases. A shallow storage box with the cord coiled gently between the stockings will help keep everything neat.
If you need to press a cotton stocking, use an appropriate setting for the fabric and protect the felt cuff from direct heat. Don't put the completed garland in the washing machine unless you've confirmed that all the fabrics, felt, embroidery thread, and cord can handle laundering together.
Decoration note: This fabric Christmas stocking garland is for display only, not for use as a baby toy. Keep the cord and hanging loops completely out of reach of babies and young children. Never attach the garland to a crib, bassinet, or other infant sleep space, and don't hang it where a child could pull it down.
And that's your finished garland! Seven little Christmas stockings made from coordinating cotton fabrics, with ivory cuffs and red hanging loops. It's a pretty way to use those smaller pieces of Christmas fabric you've been saving, and you can enjoy the finished decoration for more than one kind of holiday celebration.
When you click on links to various merchants on this site and make a purchase, this may result in this site earning a commission. This does not affect the price you pay.
UBGI Gold Standard 2026
Reviewed under the site's
editorial checklist.