Bassett C710-05 Sleigh Crib Parts Identification

The Bassett C710-05 sleigh crib shown here appears to be missing several important pieces, including screws, bolts, mattress support hardware, rod supports, angle brackets, and casters. When that much original hardware is gone, it becomes very difficult to confirm how the crib was originally configured or whether the remaining parts still match the manufacturer’s design.

These pages may help with the names and categories of the parts you’re looking at:

baby crib parts reference
crib replacement parts overview
Bassett crib parts identification help

Cribs from this period often used long connector bolts with barrel nuts, mattress support hardware, and corner brackets to hold the frame together, but identifying those categories does not confirm that the original parts are complete, correct, or still appropriate for use.

This page is provided for parts identification and documentation reference only. It is not a guide for repairing, reassembling, or returning this crib to service for infant use.

You may still want to contact Bassett, or any current successor customer service department, to ask whether model records, manuals, or archived parts information still exist for the C710-05. If any label or stamped model information is still attached to the crib, that will usually be the most helpful detail to keep with you when asking about older records.

Important Safety Note: A crib with missing hardware should be treated as unsafe until proven otherwise. It can also help to review basic crib safety guidelines before making any decision about an older model: crib safety basics for older or used cribs.