Replacement Hardware Kit# 297061 for a Delta Hutton Crib

by Di
(Ontario)

Replacement Hardware Kit #297061 for Delta Hutton Crib — Reference & Identification

A question was submitted regarding Replacement Hardware Kit #297061 for a Delta Hutton crib, identified as:

• Style #29706-108
• Lot QW12534
• Date 2012-10

When specific hardware kit numbers such as #297061 are referenced, the most reliable first step is to confirm the corresponding model and production information listed on the crib label and in the original assembly manual. Hardware kit numbers are often tied directly to model series and production runs, and they may not be interchangeable with other Delta crib lines.

To identify the correct hardware kit for this Delta Hutton crib:

• Verify the model and style information on the crib label
• Review the original assembly manual for the kit number and parts list
• Confirm whether the manufacturer still supports replacement kits for this model

Because hardware kits are model-specific, consulting the manufacturer’s consumer care department with the model and kit number on hand can help confirm whether the kit is still available or how it was originally described in documentation.

For broader Delta crib hardware and documentation guidance, see:

Delta crib replacement parts overview

This section is provided for model identification and documentation reference only. It does not provide part ordering instructions, private part exchanges, installation guidance, or third-party sourcing for discontinued crib systems.

Comments for Replacement Hardware Kit# 297061 for a Delta Hutton Crib

Average Rating starstarstarstarstar

Click here to add your own comments

Rating
starstarstarstarstar
How to Safely order the Hardware Kit
by: Anonymous

Step 1: Gather Model & Version Details

On the crib, locate the product sticker (often on the underside of the mattress platform or on one of the side panels). The sticker should list:

The SKU / Style No. for the crib

A Lot Number or "Version" letter

Manufacturer name, and possibly a date of manufacture

Using the manufacturer website Delta Children’s replacement-parts site, they advise you to enter both the style/SKU and the lot/version to ensure you get the correct part.
Delta Children Parts
+1

Make note of the exact part number being requested ("297061") and any description you have (e.g., "hardware kit for Hutton crib").

Photograph the existing hardware (if any) so you can compare screws, bolts, spacing, etc.

🔍 Step 2: Check Manufacturer’s Replacement Parts Site

Visit the Delta Children parts site → search field: enter your crib’s SKU/style number.
Delta Children Parts

On the parts page, confirm that kit "297061" (or the hardware kit number you have) is listed or find the corresponding hardware-kit number for your version.

If you locate the correct kit, add it to cart, proceed with shipping to your U.S. address (note: the site states they ship to contiguous United States only).
Delta Children Parts

Important: The site states that "Parts won’t work if it’s not the same version." So matching the lot/version on the sticker is essential.
Delta Children Parts

📦 Step 3: If the Exact Kit Is Not Available

If you cannot find kit # 297061 (or it’s out of stock), here are fallback options:

Contact Delta Children’s customer service via the parts site ("Contact Us" link) and provide: your crib’s style number, lot/version, photo of sticker, and the missing hardware kit number. They may be able to locate older stock or direct you to an authorized part vendor.

Sometimes, users have sourced generic replacement hardware if the original bolts are standard sizes. For example, on a forum someone wrote:

"I take one of the screws … down to the local hardware store and match the size there."
Reddit

If they go this route, emphasize safety and crib-compliance.

Search other retailers for "Delta crib hardware replacement kit" but check compatibility carefully. A listing on eBay: "32 pcs M6 × 12mm barrel nuts for Delta/Graco…"
eBay

If you replace hardware, ensure all screws/bolts meet crib safety standards—they should be the correct length, type, tightened to proper torque, and secure the mattress support or conversion rails properly.

🧩 Step 4: Once You Receive the Kit

Confirm that the kit includes all items listed in your assembly instructions (bolts, barrel nuts, washers, etc).

Lay out the hardware and compare to what you removed or what your manual shows.

Re-assemble the crib following the original instructions. Make sure to use the new hardware for all key attachment points (especially mattress support, side rails, etc).

After assembly, check for wobble or loose parts. The crib should be level, no gaps between joints, and all screws fully tightened.

Keep the receipt and note the hardware kit number and lot/version in a safe place for future reference.

📝 Advice Summary

In plain terms:

Don’t guess: the kit number must match the lot/version of the crib.

Do photograph the sticker so you can provide the exact style number to Delta.

Expect downtime: part may not be in stock immediately, so plan accordingly.

If using generic hardware, double-check dimensions, thread type, and strength—cribs are safety equipment.

Once done, test the crib’s stability before placing your baby in it.

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to CRIB PARTS - DELTA.

When you click on links to various merchants on this site and make a purchase, this may result in this site earning a commission. This does not affect the price you pay.

Affiliate Disclosure |

UBGI Gold Standard 2026 verified badge

UBGI Gold Standard 2026
Verified for performance, SEO,
and accessibility compliance.